Menu
My current position is Robotic consultant on standard and problem-solving tasks at BMW Shenyang. For the previous couple of years, I have been working as a robot specialist/programmer in the automotive industry, mainly in Europe. My primary focus is on robots KUKA, ABB, and Fanuc.
My work also included self-development, self-management, organization, communication with the customer, problem-solving, seeking new solutions, teamwork, and leading a small team of people.
My strengths are a rapid adaptation to the environment and the creation itself without the need for micro-management. I am very happy and fast to learn new technologies.
If I have your attention, do not hesitate to take a closer look at the resume below.
- Recognizing the mistakes and future potential risks in robots program pushes related programmers or planners to solve the problems.
- Re-checking robot programs whether following BMW standards.
- Support the robot leader to update the robot team status to customers and AIUT HQ each week and push customers to solve the problems which will make delays on the robot side.
- Support robot programmers on the side, assist them with technical issues and solve them.
- Creation of documentation to facilitate achieving cycle time optimization, EA, and OEE target for programmers.
- Assist on final buy-off.
- Archives of the robot program and necessary project documents.
- Updating the robot software, analyzing current problems, and sending information to the standard team for further processing. Creating a temporary solution.
BMW_FANUC_V8.3 Standard / Consultant is responsible for every tech. used in projects
- Temporary solutions to complex problems on production lines.
- Designing and solving problems and implementing solutions to the standard.
- Communication with the technical and standard teams in China and Germany.
- Independent survey of the standard for acceleration and improvement work with the application program.
- Advice on designing production lines.
- Collaboration and communication with the support of various applications in solving problems.
- Effective self-organization and self-management in solving problems. Identification of priority cases.
- Advice on disagreements in the robotic standard
BMW_KUKA_V8.3 Standard / Consultant is responsible for every tech. used in projects
- Teaching and adjusting programs on the line according to new design from the integration model and offline.
- Correcting problems on the line and changing movements as well as logic to achieve cycle time and quality.
- Production Standby.
Festo Gripper Technology (Handling); Spot Welding; Gluing; Palletizing; Rivet Tucker; Clinching; Tip dressers and Cap changers
- Setting up and checking projects for Communications between VKRC4 and connected devices using Workvisual and KUKA touchpad.
- Commissioning of KUKA VKRC4 robots according to offline programs within VASS programming standard
- Checking of service programs for operators and referencing of tools.
Festo Gripper Technology (Handling); Riveting; Spot Welding
- Checking of service programs for operators and referencing of tools.
- Modification of safety zones, cells, and workspaces with Workvisual and KUKA touchpad
- Safety testing and adjustment until final agreement (handover)
- Correcting problems on the line and changing movements as well as logic to achieve cycle time and quality.
- Production Standby.
Festo Gripper Technology (Handling); Gluing; Oiling; Pressing
- Creating robot projects (hardware configuration) for each robot at the production line.
- Setting up and checking projects for Communications between KRC4 and connected devices using Workvisual and KUKA touchpad.
- Commissioning of KUKA KRC4 robots according to offline programs within Integra programming standard
- Checking of service programs for operators and referencing of tools.
- Run and optimize Laser seam quality.
- Modification of safety zones, cells, and workspaces with Workvisual and KUKA touchpad
- Safety testing and adjustment until final agreement (handover)
- Correcting problems on the line and changing movements as well as logic to achieve cycle time and quality.
- Creating handover Robot Documentation.
- Production Standby.
Festo Gripper Technology (Handling); Gluing; Palletizing; Rivet; Laserline
- Creating robot projects (hardware configuration) upon VW Standard for each robot at the production line.
- Setting up and checking projects for Communications between VKRC4 and connected devices using Workvisual and KUKA touchpad.
- Commissioning of KUKA VKRC4 robots according to offline programs within VASS programming standard
- Checking of service programs for operators and referencing of tools.
Festo Gripper Technology (Handling); Spot Welding; Tip dressers and Cap changes; Gluing; Palletizing; Rivet Tucker; Rivet Tox; Clinching
- Setting up and checking the project for Communications between VKRC2 and connected devices using the KUKA panel
- Commissioning of KUKA VKRC2 robots according to offline programs within VASS programming standard.
- Correcting problems on the line and change movements as well as logic to achieve cycle time and quality
- Checking of service programs for operators and referencing of tools.
Tool-changers; Festo Gripper Technology (Handling); Spot Servo Gun; Tip dressers and Cap changes; Gluing
- Setting up and checking projects for Communications between ABB (IRC5) and connected devices using Robot Studio.
- Teaching and adjusting programs on the line according to the offline.
Festo Gripper Technology (Handling); Palletizing; Gluing; Rivet Tucker; Rivet Tox
- Setting up and checking the project for Communications between VKRC2 and connected devices using the KUKA panel
- Commissioning of KUKA VKRC2 robots according to offline programs within VASS programming standard
- Checking of service programs for operators and referencing of tools.
- Correcting problems on the line and change movements as well as logic to achieve cycle time and quality
- Creating handover Robot Documentation.
- Production Standby.
Festo Gripper Technology (Handling); Spot Servo Gun; Tip dressers; Gluing; Rivet Tucker; Fronius Mig Mag Welding
- Setting up and checking projects for Integration and Communications between VKRC4 and connected devices using Workvisual.
- Teaching and adjusting programs on the line according to new design from the integration model and offline.
Festo Gripper Technology (Handling); Spot Servo Gun; Palletizing
- Setting up and checking projects for Communications between ABB (IRC5) and connected devices using Robot Studio.
- Setting up and checking the project for Communications between KRC2 and connected devices using the KUKA panel
- Commissioning of ABB and KUKA robots according to offline programs within Integra programming standard
- Checking of service programs for operators and referencing of tools.
- Correcting problems on the line and changing movements as well as logic to achieve cycle time and quality.
- Creating handover Robot Documentation.
- Production Standby.
Tool-Changers; Festo Gripper Technology (Handling); Spot Servo Gun; Tucker Stud Welding; Tip dressers and Cap changes; Gluing; Fronius Mig Mag Welding
- Creating robot projects (hardware configuration) upon VW Standard for each robot at the production line.
- Setting up and checking projects for Communications between VKRC4 and connected devices using Workvisual and KUKA touchpad.
- Commissioning of KUKA VKRC4 robots according to offline programs within VASS programming standard
Festo Gripper Technology (Handling); Spot Servo Gun; Tucker Stud Welding and Piercing; Tip dressers and Cap changes; Gluing; Rivet Tucker; Rivet Tox
- Setting up and checking project for Communications between KRC4 and connected devices using Workvisual
- Checking of service programs for operators and referencing of tools.
Festo Gripper Technology (Handling); Spot Servo Gun; Tip dressers and Cap changers
- Creating robot projects (hardware configuration) upon VW Standard for each robot at the production line.
- Setting up and checking projects for Communications between VKRC4 and connected devices using Workvisual and KUKA touchpad.
- Commissioning of KUKA VKRC4 robots according to offline programs within VASS programming standard
- Checking of service programs for operators and referencing of tools.
- Correcting problems on the line and changing movements as well as logic to achieve cycle time and quality.
- Run and optimize Laser seam quality.
- Creating handover Robot Documentation.
- Production Standby.
Laserline; Festo Gripper Technology (Handling); Spot Welding; Roller Hemming; Tucker Stud Welding; Fronius Mig Mag Welding; Gluing; Palletizing; Rivet Tucker; Rivet Tox; Clinching
- Checking of service programs for operators and referencing tools.
- Correcting problems on the line
- Creating handover Robot Documentation.
- Production Standby
Festo Gripper Technology (Handling); Spot Servo Gun; Roller Hemming; Tucker Stud Welding; Fronius Mig Mag Welding; Gluing, Palletizing, Rivet Tucker, Rivet Tox, Clinching, Blind Rivet
Stránku vytvoril Lukáš Šleboda